Radio Linked - Call Buzzer
With (ECU) Switch Output

Call Buzzer - Transmitter Unit

Plug your switch into the Transmitter Unit and:

• Plug the ECU output switch lead into a television, computer or other equipment and control it with normal switch presses (of a short duration)

• A longer sustained switch press will send an alarm signal to the Receiver Unit which can be plugged into a power point anywhere in your home.
  The time delay, before alarm, is adjustable - typically about 10 seconds.

• The Radio Linked Call Buzzer features a powerful radio transmitter that will operate the Buzzer over distances of up to 100 Metres*.

Call Buzzer - Receiver Unit

This is the unit that sounds the alarm when it receives the alarm signal from the Transmitter Unit.
The Radio Linked Call Buzzer Receiver Unit has two modes of operation:

• Instant - The buzzer will sound after the switch is held for the delay time and the buzzer stops when the switch is released.
• Latch - The buzzer will start after the delay time and keep buzzing till the carer resets it.

 

* The range will be dependent on environmental factors.

Suitable Switches? Technical Solutions can advise on, and supply a wide range of switches and switch mounting systems. Please contact us for a catalogue and to discuss specific requirements.