Wand Switch
(The 'Clicky' Wand)

The very tough Wand Switch has been on our list for years and is still one of the most adaptable switches we make. Deals well with 'gross' movements as the wand will bend but allways bounce back to the same position - this switch can handle almost any treatment. The flexible arm which activates the switch from any angle can have many different ends sleeved onto it.

OPTIONS: See Below
Use this wand with any of our switch mounting systems - (mounting arm shown above extra)
Wand Switch, 1/4" threaded mount to suit switch mounts: WAS-1/4

 

94WAS.jpg (6696 bytes)

Wand Switch on timber base for stability:
Suits table top or wheelchair tray use
WASB

wAND - NO MOUNT
Wand Switch without any mounting attachment:
Suits DIY mounting - you need to devise a method of holding the switch case in position
WAS-NM

 

 

Magic Wand Switch
(The Electronic “No Touch” Wand)

Requires absolutely no pressure
to operate!


The Magic Wand Switch suits a wide range of applications where the user can touch with bare skin, usually the hand, arm or face. The movements can be 'gross' or 'minute' - movements as small as 2mm can be detected and no pressure is required at all!

The Magic Wand Switch can be used with the special “No Touch” Wand or unplug the wand sensor and insert the optional Magic Wand Clip Lead - see below. An audible ‘beep’ feedback can be turned on or off as required. The magic Wand Switch runs for months (depending on frequency of use) on 2 x AA batteries included. It also has a low battery warning light. The switch can be used free standing or fitted to any of our mounting systems.

Magic Wand Switch: - MWPS

Magic Wand Headset Sensor

Headset mounted wand sensor

The Magic Headset Sensor is an optional extra add-on for the Magic Wand Switch. It fits round the back of the head, supported by both ears. The headset sensor can be positioned so that it will be operated by very small movements of the chin, lips or tongue.

Magic Wand Headset Sensor: - MWPS-HS

Magic Wand Clip Lead

Plug in this optional extra clip lead and small metal objects can be clipped on and used as the touch surface. Lead length: 50cm


Magic Wand Clip Lead: MWPS-L

 

Adjustable Switches
Animal, Theme Switches
Battery Interrupter
BigRed
Bumpy Switch
Button Switches
Cordless
Crysal Clear switches
Faces
Finger Switch
Flexi Adaptor
Floating Switch
Foot Switch
Gooshy
Grip Switch
Hand Switch
Handle Bar
Head Switch
Jelly Bean
Joystick
Koosh
Leaf Switch
Lights, Music
Mat Switches
Microlight
Movement Switch
Piezo Switch
Pillow Switch
Pinch Switch
Plate Switch
Roller Switch
Soft Switch
Sensi-Ball
Sip/Puff
Sound Switch
Specs Switch
Special Modules
Squeeze Switch
Steady Hand
String Switch
Switch Directors
Switch Mounting
Textured Switches
Thumb Switch
Tilt Switch
Touch Switch
Twitch
Ultimate
Voice
Wand Switches
SPECIAL Devices
240Volts PowerLink
Puzzle Switches
Hospital Call

Index Arrow Special Switches Arrow Wand Switches
ButtonButtonButtonButtonButtonButton
ButtonButtonButtonButtonButtonButtonButton
HOME
Switches
Adapted Toys
Sensory Devices
Appliance Control
Communication
Alerting Devices
Training Devices
Computer Access
Contact
Purchasing
Download
Search This Site
Copy Part No. and Click Here for prices OR try this convenient POPUP $
logo
logo
Larger FONT
Smaller FONT
logo

Technical Solutions Australia pty. ltd.
109 Ferndale Rd. Silvan VIC 3795
PH 03 9737 9000 - www.tecsol.com.au