Single Switch
SCANNING TV CONTROLLER

Our Television Controller provides a simple method for single switch users to operate remote control televisions.

A specially designed scanning system selects on/off, volume up/down, and up to 5 different channels. The Television Controller can be 'taught' to emulate the original remote supplied with most televisions.

SCANNING TV CONTROLLER: TVCONT

(Switch required - EXTRA)

Here the Television Controller is being operated with one of our sensitive Plate Switches. Simply press the switch to control a television - see below.

Operation of the Television Controller is simple.

• The first switch press 'wakes' up the unit, and a scan commences across the top 3 lights on the panel. (Each light is colour coded for easy use in a dim room.)

• If the switch is pressed again while the light corresponding to the on/off function is lit, the system will activate the remote control, and the TV will from on to off or visa versa.

• If the switch is pressed while either the volume or channel lights are on, a second sub-scan will commence, offering a choice of up or down.

• A further switch selection will cause the volume to ramp up or down, or the channel to step up or down through the first 5 tuning selections of the television.

• If no switch is pressed, the system reverts back to the top scan, and shortly after switches back to standby.